Mine Reinforcement Geogrid Biaxial Polypropylene PP Biaxial
Classification :
keyword:
PP Biaxial Geogrid
PRODUCT DETAILS
| PP Biaxial Geogrid |
| Material; polypropylene |
| Tension; 15-55KN(support customization) |

Biaxial Geogrids provide omni axial support to granular sub bases and areas of weak or varied soils. These biaxial geogrids ensure any problems with pavements are solved by reinforcing capping layers and railway ballasts. These layers are reinforced with granular particles compacted over the grids, which penetrate and project through the apertures to create a strong interlock. An exceptionally minimal maintenance system the biaxial geotextile is a cost-effective solution for pavement problems.

![]() |
![]() |
![]() |
![]() |
![]() |
*Improve the stability and bearing capacity of the roadbed, and extend the service life;
* Provent the deformation and cracking of subguarde caused by the loss of subgrade materials;
* High strength,good fiexibility,anti-aging,resisting acid and alkaline;
* The filling capacity of retaining wall is improved, the earth pressure of retaining wall is reduced,the cost is saved, the service life is extended, and the maintenance cost is reduced.
![]() |
![]() |
![]() |
![]() |
![]() |

|
Item |
Test Method |
Unit |
PBX1515 |
PBX2020 |
PBX3030 |
PBX4040 |
PBX5050 |
|||||
|
MD |
TD |
MD |
TD |
MD |
TD |
MD |
TD |
MD |
TD |
|||
|
Polymer |
- |
- |
PP |
|||||||||
|
Minimum Carbon Black |
ASTM D 4218 |
% |
2 |
|||||||||
|
Tensile Strength |
ASTM D 6637 |
kN/m |
15 |
15 |
20 |
20 |
30 |
30 |
40 |
40 |
50 |
50 |
|
Tensile Strength @ 2% Strain |
ASTM D 6637 |
kN/m |
5 |
5 |
7 |
7 |
10.5 |
10.5 |
14 |
14 |
17.5 |
17.5 |
|
Tensile Strength @ 5% Strain |
ASTM D 6637 |
kN/m |
10.5 |
10.5 |
14 |
14 |
21 |
21 |
28 |
28 |
35 |
35 |
|
Elongation |
ASTM D 6637 |
% |
13 |
13 |
13 |
13 |
13 |
13 |
13 |
13 |
13 |
13 |
|
Junction Efficiency |
GRI GG2 |
% |
93 |
93 |
93 |
93 |
93 |
93 |
93 |
93 |
93 |
93 |
|
Flexural Rigidity |
ASTM D 7748 |
mg-cm |
250,000 |
750,000 |
2,000,000 |
4,800,000 |
8,000,000 |
|||||
|
Aperture Stability |
ASTM D 7864 |
m-N/deg |
0.32 |
0.50 |
0.75 |
0.98 |
1.10 |
|||||
|
Aperture Size |
- |
mm |
38 |
38 |
38 |
38 |
36 |
36 |
35 |
35 |
33 |
33 |
|
Roll Width |
- |
m |
3.95 or 5.95 |
|||||||||
|
Roll Length |
- |
m |
|
|||||||||
Notes MD = Machine Direction; TD = Transverse Direction
# Lin Yuan Geosynthetics reserves the right to change the product specifications at any time.

certificate
Factory Appearance

RELATED PRODUCTS
GET A FREE QUOTE









